All You Need To Know About Weber Char Broil Grill Parts
Many more Americans are into recycling these days and saving something that is older is a good idea. There are now several different Weber Char Broil Grill Parts offered in order to replace parts that are either broken or not functioning properly due to the wear and tear of time. These pieces that will save a grillers machine from the landfill can be found online or in special hardware stores.
The heat plates seem to be the most often requested item for replacement in any of the series of gas grills. A Heat Plate #7000045 for the Char-broil grill is a large 11 3/4' x 5 5/8' which could be swapped out for the original factory heat plate. Sometimes they are referred to as 'flame tamers' and different models have either three or four each. A box of three or four could be discounted at many different businesses.
The Performance and Advantage styles of charbroil machines have a stainless steel style heat plate that could be replaced with a newer model if need be. Model CBHP1 Char-broil S/S with measurements of 11 3/4' x 5 5/8' can replace several different kinds of burners on various model grills.
A Char-broil burner carry over tube is another module that is often needed when it comes to replacing pieces on an outdoor grill. Number 7000277 are designed to fit over CBPCI, flame tamer 700045 and burner CBP1. This carryover unit burner tube will also be used for the Char-broil Performance model number 461350805 grill.
In addition to the grill pieces, there are cooking units that are easily attached to a gas cooking machine to enhance its performance. There is a cook grid set that is used in various barbeque machines and will become a substitute for models 80005724 and 80005665. This piece will also fit the MCM 66652, the Uniflame, Kenmore and Thermos grill machines and the Char-broil G515-0059-W1. It is model number 66652, the Char-broil Porcelain cast iron cook grid two piece set. It measures 18 1/4' x 13 1/8' each piece which means totally it has a measurement of 18 1/4' x 26 1/4'.
At present there are over 30 Performance models that the model 7000181 Char-broil warming rack will fit on. There are times when the rest of the dinner isn't ready and one needs to keep the grilled meat or other items warm until things are prepared. There are only two separate models for the Advantage series grills.
Many times the legs are too small on Char-broil grill and they could use a 'lift'. This would be possible with leg extenders, in sets of two, model number 7000230. These leg extenders are used in over 45 different models in the Performance series and four different models in the Advantage grillers.
Before ordering new Weber Char Broil Grill parts, it is a good idea to check the owner's manual of the grilling machine to make sure one gets the correct model number. This will ensure a good fit and there may be other items that go with a grill that could enhance an outdoor cooking experience. Whatever the reason for replacing a piece on a grill, it's best to use the same brand pieces that were meant for the machine.